2014 Jeep Wrangler

2014 Jeep Wrangler recalls (4)

• AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

  Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.

  Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.

• SEAT BELTS:FRONT:ANCHORAGE

  Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.

  Remedy: FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.

• AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

  Chrysler (FCA US LLC) is recalling certain model year 2011-2016 Right Hand Drive Jeep Wrangler vehicles manufactured February 16, 2010, to May 2, 2016. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.

  Remedy: Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on August 11, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S40.

• TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

  Chrysler Group LLC (Chrysler) is recalling certain model year 2014 Chrysler Town and Country and Dodge Grand Caravan vehicles manufactured March 20, 2014, to April 22, 2014, and 2014 Jeep Wrangler vehicles manufactured March 21, 2014, to April 22, 2014. Due to a software error, the Tire Pressure Monitoring System (TPMS) may fail to learn the locations of the individual sensors while the vehicle is being driven. As a result, the low tire pressure warning light will illuminate, despite the the tire pressures being within specification. Should one of the tires lose air pressure, the driver would not be notified of the change in air pressure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 138, "Tire Pressure Monitoring Systems."

  Remedy: Chrysler has notified owners, and dealers will reprogram the TPMS module, free of charge. The recall began on October 23, 2014. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P63.

2014 Jeep Wrangler safety ratings

Source: NHTSA NCAP ratings.

2014 Jeep Wrangler owner complaints (15)

• SERVICE BRAKES

  The ABS control module on my 2014 Jeep Wrangler JK failed approximately four years ago. Since that time, I have been unable to obtain a replacement module through Jeep/Mopar, leaving the vehicle without properly functioning ABS and related electronic stability/traction-control safety systems. I was initially told the replacement part was on backorder and waited for an extended period (August 2022). In January 2026, I contacted my Jeep dealer checking on the status of my quote q96683 from 12/3/25. I was required to prepay $1,342.54 for the replacement module, which I did. It is now September 2026, approximately eight months after I prepaid, and the part still has not been supplied. I have not been given a reliable delivery date and there is no ETA. My concern goes beyond an ordinary parts shortage. This is a failure of a safety-critical braking component, and Jeep owners appear to be experiencing extremely long waits because the manufacturer cannot provide replacement ABS modules. My vehicle has needed this repair for approximately four years. A manufacturer should have a reasonable means of repairing a failed ABS/stability-control system in a vehicle of this age. Owners should not have to operate vehicles indefinitely without these safety functions—or stop using otherwise serviceable vehicles—because the manufacturer cannot supply the necessary component. I am asking NHTSA to investigate failures of the ABS control module in 2014 Jeep Wranglers, the availability of replacement modules, and whether the number of failures and inability to obtain replacement parts represent an unreasonable safety risk. I also ask NHTSA to determine whether a recall or other manufacturer action is warranted. I have documentation of the dealer order and my approximately $1,342.54 prepayment for the replacement module and can provide it if requested.

• SERVICE BRAKES

  Have had this issue since I believe 2020 or 2021. Either way a long time. This issue concerns the ABS control module failure. The warning lights (Brake, ABS and traction control) are lit showing unavailable / issue. The computer is throwing code C2200. The parts to repair are not available. Online forums show this is a big issue within the Jeep Wrangler community. It has been reported that Internally, Jeep has acknowledged the issue by placing new inventory on an "engineering review" hold after admitting that a massive batch of newly manufactured replacement parts had fatal software flaws.

• SERVICE BRAKES

  The ABS module has failed and is apparently impossible to locate. I have been working with a mechanic for 8 months now, and both the dealership and MOPAR cannot provide a date for either a replacement solution or parts availability. This seems to be a widespread issue for the Wranglers from this period. Stellantis should at least provide an alternative. Thanks,

• SERVICE BRAKES

  ABS module failure back order with no date of possible delivery

• AIR BAGS

  Recalled part not in stock, back-ordered, unavailable and no estimated time of availability; I did not receive a loaner vehicle/I need a loaner vehicle and would like an a “vehicle off road priority tag” placed on my VIN. Case filed with Jeep, case no.s 97461935 and 97468071.

• ENGINE

  The plastic oil filter housing was leaking oil onto my exhaust I had to quit driving it because of fear of a FIRE, SO MY QUESTION IS : IF YOU HAVE OIL RUNNING DOWN AND DRIPPING OF YOUR EXHAUST AND YOU GUYS WONT RECALL IT BECAUSE YOU SAY ITS NOT A SAFETY ISSUE? YOU GUYS ARE NUTS, THE MANUFACTURE SHOULD BE MADE TO MAN UP AND FIX THIS PROBLEM INSTEAD OF LEAVING THE CONSUMER STUCK WITH A PROBLEM THAT THEY CREATED AND AN EMPTY WALLET AS WELL, SIMPLY NOT FAIR MANY PEOPLE HAVE BEEN STUCK WITH THIS PROBLEM TO DEAL WITH WITHOUT ANY HELP FROM THE ENGINEERS THAT CAUSED IT, MAN UP AND MAKE EM TAKE RESPONSIBILITY IF NOT THEN WHY DOES THE NHTSA EVEN EXIST AT ALL

• SERVICE BRAKES,FORWARD COLLISION AVOIDANCE

  XXX lights on dash for abs, brakes, traction came on upon commuting home from [XXX] to [XXX]. I went to Honda Fredericksburg and diagnosis was C2200 failed and the part was on back order. Returned to SC and followed up with Jeep and local automotive services and part back order but able to drive without replacement and still awaiting product. XXX engine light on in addition to the continual abs, brake, traction lights as well as vehicle going into limp mode. Took it immediately to local automotive services shop and received ABS control Module failure is now sending error to other sensors to put Jeep in limp mode and inoperable. OEM Part still on back order and unable to obtain from Jeep. I contacted Mt. Pleasant Jeep dealership service department as well and unable to get the part. No part available and unknown timeframe which leaves me to garage the Jeep while waiting for a new part to become available. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• SERVICE BRAKES, HYDRAULIC

  The contact owns a 2014 Jeep Wrangler. The contact stated that while starting the vehicle, several unknown warning lights were illuminated. The traction control, cruise control, and ABS features were inoperable. The vehicle was taken to an independent mechanic, and DTC: C2200 was retrieved. It was determined that the ABS module needed to be replaced; however, the part was on backorder. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 93,000.

• SERVICE BRAKES, HYDRAULIC

  • ABS Control Module. • Intermittent braking & locked calipers while driving in normal conditions. Vehicle would became unstable at highway speeds at times. Sometimes resolves. Ruined calipers & almost started a fire due to friction heat from failed system. • Yes • No • Yes & No. The warnings & uncontrolled braking happens almost simultaneously & at times Intermittently. Warning lights are now on continuous. Unable to drive vehicle due to the dangers of uncontrollable braking by the module.

• SERVICE BRAKES

  The ABS module on my vehicle has gone bad. I have no antilock brakes, no traction control and my cruise control no longer works. Jeep no longer produces the module needed to repair my vehicle. Their customer service department refuses to help because I have no proof that I’ve attempted to purchase the part that isn’t available for purchase. There are thousands of people with this same issue. I’m also unable to sell or trade this vehicle because this is a major safety issue and it has diminished the value significantly. Please help me.

• ELECTRICAL SYSTEM,VEHICLE SPEED CONTROL,SERVICE BRAKES

  I own a 2014 Jeep Wrangler Sahara JKU with approximately 67,000 miles. The vehicle has experienced a failure involving the ABS control module and related braking/stability systems. Current symptoms include: * ABS warning light illuminated * Brake warning light illuminated * Traction control warning light illuminated * Intermittent speedometer malfunction * Brake pedal occasionally vibrates and becomes soft during operation * Vehicle hesitates for several seconds when accelerating from a stopped position while dashboard warning lights flash The vehicle has been diagnosed by two separate Jeep repair facilities as having a failed ABS control module. I have been informed that replacement ABS modules for this vehicle have been unavailable for approximately nine months and remain unavailable as of today. This appears to be a widespread issue affecting Jeep Wrangler JK vehicles, with many owners reportedly unable to obtain replacement safety-critical ABS modules through Mopar or dealership networks. Because the ABS and traction/stability systems are malfunctioning, the vehicle cannot pass inspection and is unsafe for my family of four, especially during rain or emergency braking situations. This issue affects federally mandated vehicle safety systems, including anti-lock braking and electronic stability control. Owners should not be left without access to replacement parts for critical safety equipment for extended periods of time.

• ELECTRICAL SYSTEM,SERVICE BRAKES

  ABS module has internal failure rendering the ABS inop. This is known issue across JK body style Jeep Wranglers.

• SERVICE BRAKES

  ABS control module has failed causing the ABS system and the traction control to fail. I have no antilock brakes now. I have had issues with braking multiple times, especially in loose traction. Manufacture stated there’s no available replacement parts to fix my condition. Traction control, ABS, and Brake lights stay illuminated on my dash. This also creates a distraction while driving.

• ELECTRICAL SYSTEM,SERVICE BRAKES

  Jeep ABS system failed. Known widespread issue. Replacement module is on back order after multiple revisions. Failed module disables the traction control with a warning on dash. Warnings also include Brake light and ABS light. With traction control disabled I have had the vehicle spin out of control in wet situation. Once it has caused me to lose control and end up off the road. Vehicle was at dealer for other recall and the ABS module needs to be replaced but on back order.

• VEHICLE SPEED CONTROL,UNKNOWN OR OTHER,SERVICE BRAKES

  ABS Module failure with no replacement available. Unit available for inspection. Vehicle can not be safely driven. Doesn't brake properly and not reliable on wet roads. Speed control non functional. Vehicle has been at dealer for months. Vehicle has been inspected by insurance and Jeep dealership. Multiple warning lamps are lit. First appeared after accident. ABS module replacements are not available per dealer.