2020 Ram 3500

ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION

Chrysler (FCA US, LLC) is recalling certain 2019-2020 Ram 3500, 4500, and 5500 cab chassis vehicles equipped with a Cummins 6.7L High Output engine. The engine calibration software may not warn about low oil volume.

Remedy: Dealers will update the engine calibration software, free of charge. Owner notification letters were mailed June 25, 2021. Owners may contact FCA US LLC customer service at 1-800-853-1403. FCA US LLC's number for this recall is Y21.

VISIBILITY:WINDSHIELD WIPER/WASHER:LINKAGES

Chrysler (FCA US, LLC) is recalling certain 2019-2020 Ram 2500 and Ram 3500 vehicles, Ram 3500 Cab Chassis, 4500 Cab Chassis, 5500 Cab Chassis and 3500 Cab Chassis with a gross vehicle weight rating (GVWR) of less than 10,000 lbs. The windshield wiper arms may loosen, possibly causing the wipers to function improperly and reduce the driver's visibility in certain weather conditions.

Remedy: Dealers will tighten the wiper nuts, free of charge. Owner notification letters were mailed February 15, 2022. This recall is an expansion of recall number 20V-208. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Z08.

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."

Remedy: Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.

POWER TRAIN:AUTOMATIC TRANSMISSION

Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 2500 and 3500 Pickup vehicles equipped with six-speed automatic (68RFE) transmissions. A build up of pressure and heat inside the transmission may result in a transmission fluid leak from the dipstick tube.

Remedy: Chrysler will notify owners, and dealers will replace the transmission valve body separator plate and reprogram the powertrain control module. The recall began March 2, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W03.

FUEL SYSTEM, DIESEL:DELIVERY:FUEL PUMP

Chrysler (FCA US, LLC) is recalling certain 2019-2020 Ram 2500, 3500 pickup trucks, and Ram 3500, 4500, and 5500 cab chassis vehicles equipped with Cummins 6.7L Turbo Diesel engines. The High Pressure Fuel Pump (HPFP) may fail, resulting in a sudden engine stall without warning.

Remedy: Dealers will replace the HPFP, update the Powertrain Control Module (PCM) software, and inspect and replace additional fuel system components as necessary, free of charge. Interim owner notification letters to inform owners of the safety recall were mailed on January 4, 2022. Owner notification letters were mailed on May 17, 2022. Phase 2 owner notification letters are expected to be mailed on March 2, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Y78.

STRUCTURE

Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 2500 and Ram 3500 Pick-up trucks equipped with an accessory bed step. In certain side loading conditions, the bed step may unexpectedly fail while in use.

Remedy: Chrysler will notify owners, and dealers will replace the bed step support brace, free of charge. The recall began on July 9, 2020 (RAM 2500) and began on October 6, 2020 (Ram 3500). Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's numbers for this recall are W24 and W44.

WHEELS:LUGS/NUTS/BOLTS/STUDS

Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.

Remedy: Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.

ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION

Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 3500, 4500 and 5500 cab chassis built with a Cummins 6.7L High Output engine. Inadequate warmup protection can cause a lack of oil film on the engine connecting rod bearings while the engine is reaching operating temperature. This can result in engine damage and connecting rod failure, which could potentially puncture the engine block.

Remedy: Chrysler will notify owners, and dealers will flash the engine calibration software to enhance the engine warm up protection, free of charge. The recall began September 10, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W57.

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

Chrysler (FCA US, LLC) is recalling certain 2019-2022 Ram 2500 and 2021-2022 Dodge Durango vehicles, and 2019-2022 3500 cab chassis with GVWR less than 10,000 lbs. The ABS control module software may prevent the electronic stability control (ESC) malfunction indicator light from illuminating during certain conditions. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."

Remedy: Dealers will update the ABS control module software, free of charge. Owner notification letters were mailed March 29, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Z20.

POWER TRAIN:AUTOMATIC TRANSMISSION

FCA US, LLC (Chrysler) is recalling certain 2020-2023 Ram 2500 and 2020-2022 Ram 3500 vehicles. A build-up of pressure and heat inside the transmission may result in a transmission fluid leak from the dipstick tube.

Remedy: Dealers will replace the transmission dipstick and transmission vent assembly, free of charge. Owner notification letters were mailed December 29, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. Chrysler's number for this recall is ZA3.

STRUCTURE:BODY:TAILGATE:HINGE AND ATTACHMENTS

Chrysler (FCA US, LLC) is recalling certain 2019-2022 Ram 1500, 2500, and 3500 pickup trucks. The tailgate may not latch properly due to misaligned tailgate strikers, which could result in the tailgate opening while driving.

Remedy: Dealers will inspect the tailgate striker alignment to the box latch and adjust, if necessary, free of charge. Owner notification letters were mailed December 22, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is ZB8.

The contact owns a 2020 Ram Promaster 3500. The contact received notification of NHTSA Campaign Number: 25V552000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while reversing, the rearview camera displayed an upside-down or distorted image. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was unknown.

The contact owns a 2020 Ram 3500. The contact stated while driving approximately 50 MPH, the engine overheated. There was no warning light illuminated. The vehicle was towed to the dealer, where it was diagnosed and determined that the cooling fan module had failed, and the engine needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline to report the failure. The approximate failure mileage was 97,000.

The contact owns a 2020 Ram 3500. The contact stated that while the vehicle was parked and the engine was turned off, the gear shifter shifted into the drive position when the contact's minor [XXX] child entered the vehicle to retrieve an item using the steering wheel and gear shifter to enter, causing the vehicle to roll down a hill and collide with a tree. The impact resulted in significant damage to the passenger side door, bumper, and truck bed. Although a child was inside the vehicle at the time of the incident, no injuries were reported following the collision. No air bags deployed. The vehicle was towed to a dealer where it had notyet been inspected. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 150,000. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2020 Ram 3500. The contact stated that while the vehicle was parked and turned off, the gear shifter shifted into drive independently, causing the vehicle to roll away. The vehicle stopped before crashing. The vehicle was taken to a dealer; however, the vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 75,000.

The contact owns a 2020 Ram 3500. The contact received notification of NHTSA Campaign Number: 25V552000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

After normal operation, I shut off the vehicle, and within seconds it caught fire without any external cause. Our insurance company and Look Larson Dodge investigated the incident over approximately 3½ weeks but could not determine a definitive cause of the fire.

The contact owns a 2020 Ram 3500. The contact stated that while driving at various speeds, the vehicle made an abnormal ticking sound. The vehicle was taken to the dealer, where it was diagnosed with high-pressure fuel pump failure, but the vehicle was not repaired at the time. The contact stated that upon pulling into a parking lot, the vehicle stalled. The vehicle failed to restart and was towed to the dealer, where it was diagnosed and determined that the high-pressure fuel pump had imploded, causing damage to the fuel system. The dealer related the failure to NHTSA Campaign Number: 21V880000 (Fuel System, Diesel), and the vehicle was repaired; however, the contact later became aware that the dealer had replaced the high-pressure fuel pump with the same part. The contact stated that upon taking the vehicle to an independent mechanic to be serviced, the mechanic informed the contact that the high-pressure fuel pump installed on the vehicle was not the recall part, but the same defective part. The mechanic recorded the high-pressure fuel pump and part number, and the vehicle was taken back to the dealer, where it was confirmed that the recall part had not been installed on the vehicle. The manufacturer was notified of the failure and referred the contact to the dealer for assistance. The contact stated that the dealer delayed performing the recall repair free of charge, which required the contact to pay for the replacement of the high-pressure fuel pump with the correct part. The vehicle was repaired. The contact stated that the manufacturer failed to complete the recall repair free of charge. The failure mileage was approximately 38,000.

The contact owns a 2020 Ram 3500. The contact stated that while driving at an undisclosed speed, the front wheels became inoperable. The contact stated that the vehicle was pulling to one side. The vehicle was taken to the dealer to be diagnosed and the contact was informed that the front wheel studs had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 36,000.

Abs module has failed twice since truck purchased.

Codes: P2002, P242F, P2463, P1451 Failures: DPF, Charge air cooler leak, PM sensors, EGR internally cracked, Catalytic Convertor, Pink tinged oil, strong diesel odor in oil - post failures. Erratic def gauge readings, unstable idling, clunking downshift when exhaust brake decelerates, warm up stumbling. Power reduced, see dealer (over and over and over and over). Limp Mode (5 MPH). Permanent ticks/taps from front left motor, front passenger wheel well, passenger side mid-truck. Extremely loose gear shifter plus an occasional “Vehicle Not in Part” message on the dash display. Manufacturers Service Center (local and ONLY Ram dealership) has reproduced the issue. Independent Diesel Mechanic shop also reproduced. Service center and Independent shop both inspected. The safety issues of a 5 MPH limp mode and risk of sudden engine stalls while driving in traffic, especially on an interstate should be fairly self explanatory… As is a constant “Power Reduced See Dealer” problem, when your truck is used to do what it’s designed to do… Tow large loads. As is an extremely loose gear shifter that doesn’t always properly register as “in Park”. The date listed below is simply the date of the very first occurrence. It’s not a representation of every date after. The most recent date was just last week.

The contact owns a 2020 Ram 3500. The contact stated while the vehicle was parked, he noticed that coolant was leaking underneath the vehicle. The EGR warning light was illuminated. The contact stated that upon adding coolant to the EGR valve, the contact noticed that coolant was still leaking. The vehicle was taken to the dealer, where it was diagnosed that the EGR valve had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 115,000.

The contact owns a 2020 Ram 3500 equipped with Atturo Tires, Tire Line: Trail Blade A/T, Tire Size: 235/80/R17, DOT Number: KA0HD80R4223. The contact stated while driving approximately 50 MPH, the front passenger's side tire experienced a blowout. The contact pulled over to the side of the road. Upon inspecting the tire, the contact noticed that the tread had separated, causing the tire to blowout. The contact replaced the tire with the spare tire. Additionally, the contact stated while driving at an undisclosed speed, the front end of the vehicle was shuddering. The vehicle was taken to the tire shop, where it was determined that the front driver's side tire tread had separated. The front driver's side tire was replaced under warranty. The tires were replacement tires. The tire manufacturer was not notified of the failure. The tire failure mileage was approximately 4,000. The vehicle failure mileage was approximately 28,000.

Reoccurring messages regarding DEF, Exhaust Regeneration, and DPF, causing more and more frequent ReGen for longer and longer. Numerous trips to various Ram dealerships resulting in codes being cleared and then being told it was a software issue. After 2 years of this intermittently happening, we experienced an extended Regen that lasted hours and did not clear out the error code. Ram dealer in Utah charged $280 to do a stationary regeneration and once again clear out codes. Less than 6 months later with more and more Regens, a failed regen sent truck into Low Power Mode (losing the ability to tow or excelerate quickly). We ended up having to take it to a Ram dealer over 2 hours away in S. Atlanta to have them take it apart and tell us that the factory installed wiring harness rubbed a hole in the charged air cooler boot which was then causing failed regeneration of the diesel particulates causing the filter to fill. Dealer clearly stated that had any other dealer done a visual inspection of the physical components they would have seen this occurring. We filed a claim and opened a case with Ram for the $4500 repair and waited 8 days with no response to 9 phone calls. The same day we authorized the work, we receive the coveted return call to start the process, but once the customer service rep found out we had already authorized the work we were advised that case would be closed and we would have to open another case for reimbursement. So we started the whole process again, submitted all of the documentation and paid receipts and have been denied. All attempts to contact a supervisor or manager go nowhere and Ram customer service is rude and unhelpful and went as far as to tell us that our mistake was having the vehicle repaired (as if we are just going to let an $80k vehicle sit indefinitely in an unusable state).

The contact owns a 2020 Ram 3500. The contact received notification of NHTSA Campaign Number: 21V880000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2020 Ram 3500. The contact received notification of NHTSA Campaign Number: 22V835000 (Power Train); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. Parts distribution disconnect.